![]() ![]() The following example specifies a subnet mask of 255.255.0.0: A BOOTP request from the host named mac results in a reply listing the boot filename as macboot.Īsync-bootp bootfile :172.30.1.1 "pcboot" With this configuration, a BOOTP request from the host on 172.30.1.1 results in a reply listing the boot filename as pcboot. The following example illustrates how to specify different boot files: one for a PC, and one for a Macintosh. Use the noĪsync-bootp command to clear the list. Use the EXEC command show async bootp to list the configured parameters. If no extended BOOTP commands are entered, the access server software generates a gateway and subnet mask appropriate for the local network. The name of the client, which might or might not be domain qualified, depending upon the site.Ī two-octet value specifying the number of 512-octet (byte) blocks in the default boot file. A preferred gateway should be listed first.ĭotted-decimal address specifying the IP address of time servers (as defined by RFC 868).ĭotted-decimal address specifying the IP address of name servers (as defined by IEN 116).ĭotted-decimal address specifying the IP address of the Domain Name Server (DNS) (as defined by RFC 1034).ĭotted-decimal address specifying the IP address of an MIT-LCS UDP log server.ĭotted-decimal address specifying the IP address of Quote of the Day servers (as defined in RFC 865).ĭotted-decimal address specifying the IP address of Berkeley UNIX Version 4 BSD servers.ĭotted-decimal address specifying the IP address of Impress network image servers.ĭotted-decimal address specifying the IP address of Resource Location Protocol (RLP) servers (as defined in RFC 887). Signed 32-bit integer specifying the time offset of the local subnetwork in seconds from Universal Coordinated Time (UTC).ĭotted-decimal address specifying the IP addresses of gateways for this subnetwork. Use the optional :hostname and data arguments to specify the filename.ĭotted-decimal address specifying the network and local subnetwork mask (as defined by RFC 950). Specifies use of a server boot file from which to download the boot program. Table 3-2: Async-BOOTP Tag Keywords Keyword ![]() ![]() List of IP addresses entered in dotted-decimal notation or as logical host names, a number, or a quoted string. The argument :hostname accepts both an IP address and a logical host name. (Optional) This entry applies only to the host specified. ![]() Item being requested expressed as filename, integer, or IP dotted-decimal address. Use the no form of this command to restore the default. Use the async-bootp command to enable support for extended BOOTP requests as defined in RFC 1084 when the access server is configured for SLIP. Table 3-1: Mapping Old Commands to New Commands Old CommandĬopy rcp running-config (for an rcp server)Ĭopy tftp running-config (for a TFTP server)Ĭopy rcp startup-config (for an rcp server)Ĭopy tftp startup-config (for a TFTP server)Ĭopy running-config rcp (for an rcp server)Ĭopy running-config tftp (for a TFTP server)įor access server configuration information and examples, refer to the "Loading System Images, Microcode Images, and Configuration Files" chapter in the Access and Communication Servers Configuration Guide. Support for these commands will cease in a future release. Note Commands in this chapter that have been replaced by new commands continue to perform their normal functions in the current release but are not longer documented. Configuration files contain commands entered to customize the functions of the access server.įor access server configuration information and examples, refer to the "Loading System Images and Configuration Files" chapter in the Access and Communication Servers Configuration Guide. System images contain the system software. This chapter provides detailed descriptions of the commands used to load and copy system images and configuration files. Thanks cco for your reply and the hit to remove the comma.System Image and Configuration File Load Commands I then added four back slashes to the server name (\\dnsname) and I was able to log in properly. The dns server name requires two back slashes (\) for it to work. If I put in a character (in this case a '-') in front of the server name, the the response is:Ĭan someone provide some insight on what is the proper way to enter in an argument for that dns name? Thanks in advance. Os.system("C:/location/of/rcmd.exe, dnsname") The problem I am having is getting the rcmd session to take the server name. So I am trying to use either os or subprocess to open a rcmd session and login to a remote server via DNS name. ![]()
0 Comments
Leave a Reply. |